How to Use a Hoover Upright Carpet Cleaner
To use a Hoover upright carpet cleaner, vacuum first, fill the clean tank with solution, and push the machine slowly forward to clean and back to dry. Empty the dirty tank, keep traffic off the damp carpet, and rinse the brush area before storing it.
On this page (10 sections)
- What should you do before turning the cleaner on?
- How do you fill and set up the tanks?
- How do you make cleaning passes with a Hoover upright?
- How do you dry the carpet and protect it?
- How do you empty and clean the machine afterward?
- Which Hoover upright should you pick?
- How do you clean stairs and upholstery with the hose tools?
- What mistakes should you avoid?
- How often should you deep clean?
- The bottom line
To use a Hoover upright carpet cleaner, vacuum first, fill the clean tank with solution, and push the machine slowly forward to clean and back to dry. Empty the dirty tank, keep traffic off the damp carpet, and rinse the brush area before storing it.
The steps are the same on most Hoover upright models. The difference is how much the machine does for you: some mix the solution and dry the carpet automatically, while others leave the trigger and the passes to you.
What should you do before turning the cleaner on?
Vacuum the whole room first and move everything off the carpet. Loose dust, crumbs and pet hair clog the brush roll and get pushed deeper into the pile if you skip this step.
Clear small furniture, lamps and floor plants out of the way. Lift the edges of any rug so the machine's wheels don't catch them.
Check the carpet's care label and the machine's manual for fiber restrictions.
Test a hidden corner with the cleaning solution before you do the whole room. Wait for it to dry and check for color change or shrinkage.
Wool and some delicate fibers can react badly to wet cleaning. A quick test saves you from a ruined rug.
Also think about where the machine will go. A corded upright needs a nearby outlet and a clear path to the door, so plan your starting corner with the cord in mind.
Coil the cord loosely behind you as you work so it doesn't snag furniture legs or trip you on the back pass.
Can you use a Hoover upright carpet cleaner on area rugs?
Sometimes, but check the rug's backing first. A Hoover upright works well on many synthetic area rugs laid flat on the floor, while wool, silk and hand-knotted rugs need a gentler method.
Read more in can you use a carpet cleaner on area rugs before you start.
How do you fill and set up the tanks?
Fill the clean tank with water and solution to the marked ratio, then seat both tanks firmly. Hoover's dual-tank design keeps clean and dirty water apart, so you always clean with fresh solution.
- Unplug the machine before opening the tank.
- Lift out the clean tank and fill it to the mark with warm water.
- Add the cleaning solution at the ratio on the bottle, unless the machine has Auto Mix.
- Snap the clean tank back in place and check the dirty tank is empty and seated.
Models with Auto Mix create the ratio for you. On those machines, fill the clean tank with water and let the machine handle the solution.
Push the handle down until it clicks into its cleaning position.
The PowerScrub Deluxe holds 3.8 liters in its tanks, so it covers more carpet between refills than a smaller machine. Its Auto Mix feature keeps the water-to-solution ratio consistent, which matters on a whole room.
The SmartWash+ uses Auto Mix the same way, but its tank holds 0.5 gallons, so expect to top up sooner on large areas.
How do you make cleaning passes with a Hoover upright?
Push the machine slowly forward to clean and pull it back to dry. Slow passes give the brushes time to work and the suction time to lift dirty water.
Start at the far corner of the room and work back toward the door in parallel strips. Overlap each pass by a few inches so you don't leave uncleaned lines.
Keep a steady pace: rushing leaves the carpet wet and the stains half-lifted.
On a trigger model like the PowerScrub Deluxe, hold the trigger on the forward pass and release it on the pull-back. That back pass is for drying, not for adding more solution.
One or two cleaning passes over a spot are usually enough. The five counter-rotating SpinScrub brushes work the pile from several angles as you go, so you don't need to press down hard.
On the SmartWash+, there is no trigger to hold. Push forward to clean and pull back to dry, and the machine senses the motion and releases solution on its own.
That makes long rooms less tiring, especially if you are cleaning several rooms in one session.
How many passes should you make?
Make one or two cleaning passes and one dry pass per strip. Extra wet passes add water without adding much cleaning power, and soaked carpet takes much longer to dry.
For a heavily soiled high-traffic area, go over the strip twice, then finish with a slow dry pull. Let the carpet dry fully before deciding whether it needs another round.
If the water coming up looks clear on the dry pass, the strip is done.
How do you dry the carpet and protect it?
Keep the room warm and aired, and stay off the carpet until it's dry. Open windows or run a fan and a dehumidifier if you have one.
Damp carpet under furniture can grow odors.
Hoover's HeatForce technology blows warm air to speed drying on models that include it. The SmartWash+ also has an Auto Dry feature that extracts water as you pull back.
Even so, plan for several hours of drying time. Warm, moving air does more for drying than any single pass, so set up a fan before you finish the room.
Keep pets and kids out of the room while it dries. Walk in clean socks or bare feet if you must cross it.
Don't put furniture back until the pile feels dry to the touch. If you need to move a heavy item back early, slide a sheet of foil or plastic under its legs to keep rust and dye off the damp fibers.
How do you empty and clean the machine afterward?
Empty the dirty tank right away, then rinse the tank and brush area before storage. Dirty water left in the tank smells and can grow mold.
Unplug the machine, lift out the dirty tank and pour it down a drain or toilet. Rinse the tank with warm water and let it air dry with the lid open.
Wipe the outside of the machine with a damp cloth.
Remove hair and fiber from the brush roll. The PowerScrub Deluxe includes a mesh storage bag for the tools, so keep the attachments together between cleans.
Let everything dry fully before you put the machine away. A dry machine stored with its lid open stays fresher between deep cleans.
Which Hoover upright should you pick?
The PowerScrub Deluxe suits most homes, because its five counter-rotating SpinScrub brushes and HeatForce drying handle deep, set-in stains and pet messes. The SmartWash+ is the easier option if you want less thinking and less trigger work.

Five SpinScrub brushes and HeatForce drying for deep stains, with an 8 ft hose and pet and upholstery tools for stairs and furniture.
See it on Amazon
Push forward to clean and pull back to dry, with Auto Mix and Auto Dry taking the guesswork out of the passes.
See it on Amazon
A concentrated 48 oz shampoo for tough ground-in dirt and stains, with StainProtect to help resist future messes.
See it on AmazonThe PowerScrub Deluxe also includes a sample of Hoover Clean Plus 2X carpet cleaner, a crevice tool and a mesh storage bag, so you can start on stairs and corners the same day. It carries a 2-year limited warranty.
The SmartWash+ adds a 2-in-1 pet tool and a stair tool, and it carries a 5-year warranty. Both machines weigh 18.5 pounds.
For a tough room, pair either one with the Bissell Deep Clean Pro 4X shampoo, a concentrated 48 oz formula for ground-in dirt with StainProtect to help resist future stains. Check the bottle ratio against your machine's Auto Mix setting.
How do you clean stairs and upholstery with the hose tools?
Fit the hose and tool, then work the tool slowly over the surface without flooding it. The main brush is for open carpet; stairs, sofa cushions and car seats need the smaller attachments.
Attach the 8 ft hose to the machine as the manual shows. Choose the upholstery tool for fabric furniture and the crevice tool for corners and edges.
Hoover's PowerScrub Deluxe kit includes a pet tool for stubborn messes. The 8 ft hose reaches up a flight of stairs without moving the machine to each step.
Use short, overlapping strokes and keep the trigger pressed only briefly. Blot excess moisture with a clean towel afterward.
The same approach works on car interiors, and our guide to using a carpet cleaner on car seats covers the fabric-safe details.
What mistakes should you avoid?
Don't over-wet the carpet, skip the vacuum or leave solution in the tank. These are the mistakes that cause slow drying, sticky residue and machine odors.
- Soaking the carpet with repeated wet passes leaves it damp for hours.
- Using too much solution leaves residue that attracts new dirt.
- Leaving dirty water in the tank causes smells and mold.
- Forgetting to vacuum first pushes loose debris deeper into the pile.
- Cleaning on a cold day with the windows shut leaves moisture trapped in the room.
Follow the bottle ratio and let the back pass do the drying. If a stain stays after one round, let the carpet dry and try again rather than flooding it.
How often should you deep clean?
Deep clean high-traffic rooms every 3 to 6 months, and spot clean spills as they happen. Rooms with pets or kids usually need the shorter end of that range.
Vacuum regularly between deep cleans to keep grit out of the pile. Treat spills quickly with a blot and a spot clean so they don't set.
For whole-home cleaning and machine comparisons, see our guide to the best carpet steam cleaner options.
The bottom line
Learning how to use a Hoover upright carpet cleaner comes down to a simple rhythm: vacuum, fill, slow forward pass, slow dry pull, then empty and rinse. Pick the PowerScrub Deluxe for deep stain work and its tool kit, or the SmartWash+ if you want the machine to handle the mixing and drying for you.
Either way, keep the passes slow and the carpet dry before you walk on it. For a different brand's steps, see how to use a Bissell upright carpet cleaner.
Frequently asked questions
How long should carpet take to dry after cleaning?
Most carpets feel dry within 6 to 8 hours when the room is warm and aired. Keep windows open or run a fan and stay off the carpet until it's fully dry, since damp fibers flatten under footsteps.
Can I use a Hoover upright carpet cleaner on hardwood floors?
No. These machines are built for carpet and upholstery.
Water can warp and stain wood, so use a hard floor cleaner or a damp mop instead, and keep the carpet washer off sealed hard floors.
How much cleaning solution goes in the tank?
Follow the ratio printed on the solution bottle and the marks on the clean tank. Hoover's Auto Mix machines set the ratio for you.
More solution is not better and can leave a sticky residue that attracts dirt.
Should I vacuum before using a carpet cleaner?
Yes. Vacuuming first removes loose dust, crumbs and pet hair so the brushes work on stains rather than surface debris.
Skipping this step clogs the machine and pushes dirt deeper into the pile.
Can I clean upholstery and stairs with a Hoover upright?
Yes, if your model includes the hose and tools. Hoover's PowerScrub Deluxe kit includes an upholstery tool, pet tool and crevice tool for stairs, furniture and corners.
Use the hose tools on those surfaces, not the main brush.
About this guide: Our look at using a Hoover upright carpet cleaner draws on maker specs, materials and what owners report. See how we research.



